Honda Automobiles 2009 Civic Hybrid Owner's Manual page 152

SEEK The seek function
searches up and down from the
current frequency to find a station
with a strong signal. To activate it,
press and hold the or
the TUNE bar until you hear a beep,
then release it.
SCAN The scan function samples
all stations with strong signals on the
selected band. To activate it, press
the SCAN button, then release it.
You will see SCAN in the display.
The system will scan for a station
with a strong signal. When it finds
one, it will stop and play that station
for about 10 seconds.
Playing the AM/FM Radio (Models with navigation system)
If you do nothing, the system will
then scan for the next strong station
and play it for 10 seconds. When it
plays a station you want to listen to,
side of press the SCAN button again.
Preset Each preset button can
store one frequency on AM and two
frequencies on FM.
1. Select the desired band, AM or
FM. FM1 and FM2 let you store
six stations each.
Use the tune, seek, or scan
2.
function to tune the radio to a
desired station.
3. Pick a preset button, and hold it
until you hear a beep.
4. Repeat steps 1 through 3 to store a
total of six stations on AM and
twelve stations on FM.
2009 Civic Hybrid
Each preset button's frequency is
shown on the bottom of the audio
display.
CONTINUED
149