Information For Test Institutes; Turbospeed 20 Min - Siemens Dishwasher Operating Instructions Manual

Information for test institutes

Test institutes receive the information for
comparability tests (e.g. according to
EN60436).
These are the conditions for conducting
the tests, however these are not the
results or consumption values.
Request by e-mail to:
dishwasher@test-appliances.com
The product number (E no.) and the
production number (FD) are required
which you can find on the rating plate
92 on the appliance door.
TurboSpeed 20 min. –
T u r b o S p e e d 20 mi n .
especially quick rinsing
programme with one-off
preheating*
* depending on model
The appliance is heated up once
(approx. 25 min.), then the appliance is
loaded and several quick rinse cycles
(20 min. each) can run in succession.
Note
Detergent tablets are not suitable for
this programme, as the detergent
cannot completely dissolve within the
short time. Therefore always use powder
detergents and ensure that the salt and
rinse aid dispensers are always filled
and set to the correct value (see
chapters entitled "Salt" and "Rinse aid").
Overview of programmes
Please read the operation carefully, the
programme differs from the other
programmes.
1. Close the door.
2. Switch on ON/OFF switch (.
3. Select programme TurboSpeed 20
min.
flashes on the digital display )*
( = Heating phase).
4. Press START button h.
The heating up phase of the empty
appliance starts. If the appliance is
loaded before the heating phase, the
duration of the heating phase is
extended. and the remaining
heating up time are indicated
alternately on the digital display )*.
5. As soon as p (p = Load) flashes,
open and load the appliance and
start the rinsing phase by pressing
the START button h.
Attention! Interior is hot.
The remaining running time is
indicated on the digital display )*.
6. As soon as :
digital display )*, the rinse cycle
has ended.
7. Remove utensils.
Attention! The utensils are hot and
sensitive to shock!
p flashes on the digital display )*.
8. If more rinse cycles are required,
reload dishwasher and press the
START button.
9. If no more rinse cycles are required,
switch off ON/OFF switch (.
is indicated on the
en
19