Assembly - Homelite UT44170 Operator's Manual

UNPACKING
This product requires assembly.
 Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included.
 Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
 Do not discard the packing material until you have carefully
inspected and satisfactorily operated the product.
 If any parts are damaged or missing, please call
1-800-242-4672 for assistance.
PACKING LIST
Grass shear/shrubber
Wheel and Extension Handle Kit
4 in. Grass Shear Blade
6 in. Shrubber Blade
Lockout Pin
Charger
Shrubber Scabbard
Grass Shear Sheath
Operator's Manual
WARNING:
If any parts are damaged or missing, do not operate this
product until the parts are replaced. Failure to heed this
warning could result in serious personal injury.
WARNING:
Do not attempt to modify this product or create
accessories not recommended for use with this product.
Any such alteration or modification is misuse and could
result in a hazardous condition leading to possible serious
personal injury.
WARNING:
Do not connect to power supply until assembly is
complete. Failure to comply could result in accidental
starting and possible serious personal injury.

ASSEMbLy

CONNECTING ThE POLES
See Figure .
Before using the grass shear/shrubber, a one-time assembly
is required. When removed from the box, the two poles are
connected by an electrical cord as shown below.
WARNING:
Never install, remove, or adjust any attachment while
grass shear/shrubber is running. Failure to stop the grass
shear/shrubber can cause serious personal injury.
 Push in the button located on the lower shaft. Align the
button with the guide recess on the upper shaft and slide
the two shafts together until the button locks into the
positioning hole.
Page 
positioning
hole
button
lower shaft
upper shaft
Fig. 2