Panasonic DBS 824 Manual page 12

Installation
Caution: DO NOT connect the Red and Black wires from the CBL-S card
5. If the Red and Black wires on the CBL-S card have exposed conductors,
6. Secure the Red and Black wires out of the way.
Figure 5. CBL-S Red and Black Wire Location
G ND
+24V
Pow er
Suppl y
Pow er
Sw i t ch
8
Section 320 - DBS 824 to DBS Interconnection Supplement
to the DBS 824 Power Supply. Connecting the wires may
damage the equipment.
separate the wires and cover the exposed conductors on each wire with
electrical tape.
208 208 CPC
DBS Manual - Revised April 2000
CBL-S
AU X
DO NOT CONNECT THE
RED AND BLACK WIRES TO
THE DBS 824 POWER SUPPLY.
Connecting these wires may
damage the equipment.
Black
Wire
Red
Wire
CAUTION:
DBS-2.3/9.2-320