Directional Exhaust; Quick Release Door; Accessories - Stanley Bostitch T55 Series Operation And Maintenance Manual

Models T55S4 and T55S5 contain a Quick Release Door feature. The door is designed to "pop" open if a jam occurs providing easy access for
removing a jammed fastener.
ALWAYS DISCONNECT AIR SUPPLY BEFORE CLEARING A JAMMED FASTENER.
If the door does not "pop" open when a jam occurs, it can easily be opened with a screwdriver, as shown in illustration #1. Use a firm twist on the
screwdriver to open the door, see illustration #2.
The door will not open completely if the driver is still down. To open the door completely the driver must be pushed back into the tool.
The "Quick Release Door" makes cleaning the nose and front portion of the magazine a rapid and easy operation with a minimum of effort.
To close the door simply press the door firmly against the edge of the work table or suitable stationary object until the two latch pins snap into a locked
position.
CAUTION: Do not use your hands to close the door as injury may occur if skin is pinched between the door and nose when the latch pins
engage.
BC601
BC602
BC603
BC604
851325
851385
N80K2
ORK1
BK6
T55K1
100679
DIRECTIONAL EXHAUST DEFLECTOR
Loosen screw as shown. Adjust to desired exhaust direction and tighten screw.
FIG. 1
4 oz. Stanley-Bostitch Air -Tool Lubricant
1 pint Stanley-Bostitch Air -Tool Lubricant
1 pint Stanley-Bostitch "Winter-Fromula" Air-Tool Lubricant
1 quart Stanley-Bostitch Air -Tool Lubricant
Locite Grade 271 (.02 oz.)
Locite Grade 242 (.02 oz.)
Remote Control Kit
O-Ring Kit
Bumper Kit
Speed Enhancer Kit
Lube (1 lb can)

QUICK RELEASE DOOR

ACCESSORIES AVAILABLE
-11-
FIG. 2