Whirlpool Dishwasher Instructions For Use Manual page 5

396gb94500.fm5 Page 16 Monday, July 9, 2001 3:26 PM
To fill the salt container
Warning: only use regeneration salts for use in domestic dishwashers!
Do not fill the salt container with unsuitable substances, such as
detergent, as this will cause irreparable damage to the water softener
system.
1. Remove the lower rack.
2. Unscrew the cap by turning it counter-clockwise.
3. When first using the dishwasher: fill the salt container to the rim with
water.
4. Fill the salt container to the rim with salt (using the filler provided)
(when filling for the first time use min. 1.5 kg and max. 2 kg) and stir
with a spoon handle.
5. Screw the cap back on by turning it clockwise and make sure it is
properly fastened.
6. Fit the lower rack.
7. If regeneration salt is to be added, immediately start a wash
programme (rinsing alone is not sufficient) in order to eliminate any
residual saline solution straight away and avoid corrosion.
Salt level indicator
The dishwasher is equipped with an electric or visual salt level indicator
(depending on the model installed).
Electric indicator
The salt level indicator lamp
salt container is empty.
Visual indicator
The float is clearly visible in the cap window when the salt container is full.
The float lowers and is no longer visible when the salt container is empty.
16
on the control panel lights up when the