Mixer Strip Creation - E-Mu 404 Owner's Manual

Mixer Strip Creation

PatchMix DSP is a dynamically configurable mixer. Each mixer session can contain an
arbitrary number of strips up to a limit set by the number of available input sources and
available DSP resources.
To Add a New Strip:
Click on the New Mixer Strip button.
1.
The Assign Mixer Strip Input Dialog appears:
2.
Select the desired input to the mixer strip from the following choices:
3.
• Physical Source:
• Host - ASIO Source input
• Host - WAVE input
Mixer Strip Type
Physical: PCI Card Analog 24-bit monophonic analog input.
Physical: PCI Card S/PDIF
Host: WAVE L & R
Host: From ASIO Out
Select Pre-Fader Aux Sends or leave the box unchecked for Post-Fader Aux Sends.
4.
Click OK to create a new strip or Cancel to cancel the operation.
5.
To Delete a Mixer Strip:
Click the top of the mixer strip you wish to delete. A red border appears around the
1.
strip, indicating that it is selected.
Click on the Delete Mixer Strip button.
2.
E-MU Digital Audio System
See Overview of the Mixer
Stereo analog or digital card input (Analog or S/PDIF)
Streaming audio from an ASIO software application.
Window sound sources—WAVE, Direct Sound, WDM, CD
Function
2 channel digital audio from the S/PDIF input.
Direct Sound, WDM, Windows Media (Sound generated or
handled by Windows, such as game sound, CD player, beep
sounds, etc.).
2 channel digital audio from an ASIO source (software application).
See Overview of the Mixer
4 - The PatchMix DSP Mixer
Mixer Strip Creation
f Use the WAVE strip
to playback CDs,
Windows Media Player,
and non-ASIO audio
applications.
f See "Pre or Post Fader
Aux Sends" on page 29.
19