2. Remove bulb housing
downwards, taking care not to pull
on the cable.
3. Lift flap and disconnect wiring
plug from bulb holder.
Ofrecido por www.electromanuales.com
4. Rotate bulb holder anti-clockwise
to disengage.
5. Remove bulb from holder and
renew bulb.
6. Insert bulb holder in bulb housing
and rotate clockwise.
7. Connect wiring plug to bulb
holder.
8. Insert and engage bulb housing.
Interior lights
Courtesy light, reading lights
Have bulbs replaced by a workshop.
Vehicle care
Load compartment light
1. Prise the lamp out with
a screwdriver.
165