Table of Contents
Advertisement
Section 14
Troubleshooting
The Delphi NAV200 unit is designed and built to provide trouble-free performance.
If a fault occurs, first refer to this information before you
take the device for repair.
If it does not appear to be functioning properly, please follow these troubleshooting
guidelines.
No GPS fix:
1.
Check the satellite icon in the upper right corner of the map view screen.
2.
Make sure the antenna on the unit is pointed outward and upward,
providing a clear view of the sky.
3.
Ensure that the vehicle does not have a heat-reflecting or heated
windshield. These cut out GPS signals. An external antenna can be
purchased from your retailer to help ensure adequate GPS signal
reception.
4.
The first time you use Delphi NAV200, it may take several minutes to
get the first GPS fix. The unit self-calibrates and locates the satellites.
The information it discovers this time is stored in memory so from that
point on, it should take less than 40 minutes to get a fix. If you travel
overseas, the unit can take up to 20 minutes to acquire a first fix.
GPS randomly loses its fix:
Many factors can affect GPS reception. It is best to be outdoors with a clear
view of the sky.
The GPS receiver continues to search for a signal and automatically
recalculates the route once the reception is restored.
No audible destination instructions:
Check the volume. Adjust volume with dial on right side of unit.
Unit does not start:
Check that you have followed the instructions.
If you are unable to rectify the fault using the information given here, contact
your specialist dealer. Never attempt to repair the device yourself under any
circumstances, as this invalidates the guarantee.
Operation Manual Delphi NAV200
31
Advertisement
Table of Contents
