BIXOLON SRP-350IIOBEi User Manual
  1. Manuals
  2. Brands
  3. BIXOLON Manuals
  4. Printer
  5. SRP-350IIOBEi
  6. User manual
BIXOLON SRP-350IIOBEi User Manual

BIXOLON SRP-350IIOBEi User Manual

Hide thumbs Also See for SRP-350IIOBEi:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Installation Manual
User's Manual
SRP-350IIOBEi
Thermal Printer
Rev. 1.01
http://www.bixolon.com

Advertisement

Table of Contents
loading

Related Manuals for BIXOLON SRP-350IIOBEi

Summary of Contents for BIXOLON SRP-350IIOBEi

  • Page 1 User's Manual SRP-350IIOBEi Thermal Printer Rev. 1.01 http://www.bixolon.com...

  • Page 2: Safety Precautions

    SRP-350IIOBEi ■ Safety Precautions In using the present appliance, please keep the following safety regulations in order to prevent any hazard or material damage. WARNING Violating following instructions can cause serious injury or death. Do not plug several products in one multi-outlet.
  • Page 3 SRP-350IIOBEi CAUTION Violating following instructions can cause slight wound or damage the appliance. Keep the desiccant out of children’s reach. If you observe a strange smoke, odor or noise from the printer, unplug it before taking following • If not, they may eat it.
  • Page 4 SRP-350IIOBEi ■ Warning - U.S.A 1) NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This...

  • Page 5: Label Material

    SRP-350IIOBEi ■ Waste Electrical and Electric Equipment (WEEE) This marking shown on the product or its literature, indicates that is should not be disposed with other household wastes at the end of its working life, To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.
  • Page 6 SRP-350IIOBEi ■ Introduction The SRP-350IIOBEi Roll Printer is designed for use with electronic instruments such as system ECR, POS, banking equipment, computer peripheral equipment, etc. The main features of the printer are as follows: 1. High speed printing: 47.28 (1/6” Feed) lines per second.

  • Page 7: Table Of Contents

    SRP-350IIOBEi ■ Table of Contents 1. Setting Up the Printer ....................8 1-1 Unpacking ........................8 1-2 Connecting the Cables ....................9 1-2-1 Ethernet Communication ................9 1-2-2 USB Communication ................... 10 1-2-3 Bluetooth Communication ................10 1-3 Connecting the Drawer ..................... 11 1-4 Setting the Dip Switches ...................

  • Page 8: Setting Up The Printer

    SRP-350IIOBEi 1. Setting Up the Printer 1-1 Unpacking Your printer box should include these items. If any items are damaged or missing, please contact your dealer for assistance. SRP-350IIOBEi Cover Cable Roll Paper Manual AC Adapter Power Cord USB A-B Cable - 8 - Rev.

  • Page 9: Connecting The Cables

    SRP-350IIOBEi 1-2 Connecting the Cables You can connect up the three cables to the printer. They all connect to the connector panel on the back of the printer, which is shown below: ※ NOTE Before connecting any of the cables, make sure that both the printer and the host are turned off.

  • Page 10: Usb Communication

    White Green Receive + Blue White Blue Green Receive - White Brown Brown * For more information, refer to the Ethernet User Manual in Bixolon Web Site. 1-2-2 USB Communication Drawer kick-out Connector Power supply Connector Connector Pin No. Signal Name...

  • Page 11: Connecting The Drawer

    SRP-350IIOBEi 1-3 Connecting the Drawer ※ WARNING Use a drawer that matches the printer specification. Using an improper drawer may damage the drawer as well as the printer. ※ CAUTION Do not connect a telephone line to the drawer kick-out connector; otherwise the printer and the telephone line may be damaged.

  • Page 12: Installing Or Replacing The Paper Roll

    SRP-350IIOBEi 1-5 Installing or Replacing the Paper Roll ※ NOTE Be sure to use paper rolls that meet the specifications. Do not use paper rolls that have the paper glued to the core because the printer cannot detect the paper end correctly.
  • Page 13 SRP-350IIOBEi 1-5-5 Be sure to note the correct direction that the paper comes off the roll. 1-5-6 Pull out a small amount of paper, as shown. Then close the cover. ※ NOTE When closing the cover, press the center of printer cover firmly to prevent paper miss-loading.

  • Page 14: Paper Jam

    SRP-350IIOBEi 1-6 Paper Jam If the paper jam occurs, the Buzzer will beep. If the cover-open can be opened, open the Cover-open and remove the paper. If the Cover-open cannot be opened, Follow the below. 1-6-1 Turn the printer off/on to make the cutter initialized, and then open the cover-open.

  • Page 15: Adjustments And Settings

    SRP-350IIOBEi 1-7 Adjustments and Settings The SRP-350IIOBEi is set up at the factory to be appropriate for almost all users. It does, however, offer some settings for users with special requirements. It has DIP switches that allow you to change communication settings, such as handshaking and parity check, as well as print density.

  • Page 16: Connecting The Power Supply

    SRP-350IIOBEi 1-9 Connecting the Power Supply ※ CAUTIONS When connecting or disconnecting the power supply from the printer, make sure that the power supply is not plugged into an electrical outlet. Otherwise you may damage the power supply or the printer.

  • Page 17: Self Test

    SRP-350IIOBEi 2. Self-Test The self-test checks whether the printer has any problems. If the printer does not function properly, contact your dealer. The self-test checks the following; 2-1 Make sure paper roll has been installed properly. 2-2 Turn on the power while holding down the FEED button until it beep 3times.

  • Page 18: Ios Mfi Mode Setting (Optional)

    SRP-350IIOBEi 3. iOS MFi Mode Setting (Optional) This product supports MFi mode that enables Bluetooth communication with iOS devices. (Applicable to MFi support models only: SRP-350IIOBEi) 3-1 How to enable and disable MFi mode 1. Turn off the printer power.

  • Page 19: Hexadecimal Dumping

    SRP-350IIOBEi 4. Hexadecimal Dumping This feature allows experienced users to see exactly what data is coming to the printer. This can be useful in finding software problems. When you turn on the hexadecimal dump function, the printer prints all commands and data in hexadecimal format along with a guide section to help you find specific commands.

  • Page 20: Specification

    SRP-350IIOBEi 5. Specification Printing method Thermal line printing Dot density 180 dpi (7dots/mm) Printing width 72 mm Paper width 79.5±0.5 mm Characters per line (default) 42 (Font A) / 56 (Font B) / 56 (Font C) 47.28lines/sec , 200 mm/sec...

  • Page 21: Appendix

    SRP-350IIOBEi 6. Appendix 6-1 Cleaning Printer Paper dust inside the printer may lower the print quality. In this case clean the printer as follows. 6-1-1 Open the printer cover and remove the paper if exists. 6-1-2 Clean the print head with a cotton swab moistened with alcohol solvent.

Table of Contents