D-Link DGS-1510 Series Hardware Installation Manual page 39

DGS-1510 Series Gigabit Ethernet SmartPro Switch Hardware Installation Guide
Console
Fan
Stacking ID
Port LED Mode
Indicator
LED Per Link/Act/Speed Mode Green
10/100/1000 Mbps
Port
Light off
Green
Solid Light
Light off
Green
Solid Light
Red
Solid Light
Green
Capable 1 – 6, H, h,
E, G.
A LED Mode Select Button to switch two modes in turn for all
10/100/1000Mbps ports on DGS-1510-28P:
Link/Act/Speed Mode
PoE Mode (Only DGS-1510-28P)
Green
Solid Light
Solid Light
Solid Light
Blinking
Orange
Solid Light
Blinking
39
Power off.
Console on.
Console off.
Diagnostics pass. Normal operation.
Fan failure.
The box ID is assigned either by user
(static mode) or by the system
(automatic mode). When the box
become a primary master, the 7
segment works as bi-function. That is
box ID and "H" indicate as primary
Master and the display will be shown
by turn.
That is boxID -> H -> boxID -> H.
1-6: To indicate the stacking of the
switch.
H: When device was assigned as the
stacking Master.
h: When device was selected to be the
Backup Master.
E: Error was found during system self-
test.
G: When Safeguard Engine entering
the exhausted mode.
A LED Mode Select Button to switch
Link/Act/Speed Mode
A LED Mode Select Button to switch
PoE Mode
When there is a secure connection (or
link) to 1000Mbps Ethernet device at
any of the ports.
When there is reception or
transmission of data occurring at
1000Mbps.
When there is a secure connection (or
link) to 10/100Mbps Ethernet device at
any of the ports.
When there is reception or