Configuration; Easy Search Utility - D-Link ShareCenter Pro DNS-1200-05 User Manual

Section 3 - Configuration
When first powered on, during the initial boot sequence, the ShareCenter will wait to be assigned an IP address via
DHCP. If it does not receive a DHCP assigned IP address, by default it will have a self-assigned IP address in the range
of 169.254.0.0 to 169.254.255.255. It is recommended to use the included D-Link Easy Search Utility when accessing
and configuring the ShareCenter for the first time. If you want to change the IP address before logging in or are unable
to connect to the ShareCenter IP address, you can use the Easy Search Utility provided on the product CD to locate
the device on your network and make any needed changes.
The Easy Search Utility displays any
Network
ShareCenter devices it detects on the network
Storage Device
here.
Click Refresh to refresh the device list.
Refresh
Click Configuration to access the Web based

Configuration

configuration of the ShareCenter.
Configure the LAN Settings for the ShareCenter
LAN
here.
Click Apply to save changes to the LAN
Apply
Settings.
Displays the available iSCSI targets on
iSCSI Drive
ShareCenter.
Mapping
Click Connect to connect to the iSCSI target.
Connect
Click Management to edit the information.
Management
Volumes available for mapping are displayed
Drive Mapping
here.
Choose an available drive letter. Click Connect
Available Drive
to map the selected volume. Click Disconnect
Letters
to disconnect the selected mapped volume.
Click About to view the software version of the
About

Easy Search Utility.

Click Exit to close the utility.
Exit
D-Link ShareCenter Pro 1200 User Manual
Configuration
Easy Search Utility
11