Function Of Each Button - LG WT-R107 Service Manual

3-3. FUNCTION OF EACH BUTTON.

Use to turn the power on or off.
Push again and power goes on or off
The power goes off automatically after the wash is
finished.
After turning the power on, if you don't push any button
the power goes off automatically.
Soak, Spin Hold BUTTON
It gives additional Soak.
The following settings are indicated as the
button is pushed 15
180min.
(refer to page 21)
EXTRA RINSE BUTTON
It gives additional rinse cycle.
(For better rinsing effect)
(refer to page 22)
Custom Program
BUTTON
This button allows
you to store a
customized wash
cycle for future
use .
(refer to page 23)
Note
* For optimizing the washing algorithm, the displaying time may be changed.
POWER BUTTON
30 45 60 120
Soak off 15
SOIL LEVEL BUTTON
This button allows you to select
the strength of the wash action.
Power option selections light up
in sequence as follows Normal
Heavy Light Normal as the
button is pushed.
This can be selected for any
program.
Adjustment can be made while
washing.
Default SOIL LEVEL is Normal.
DELAY WASH (Reservation)
BUTTON
Use to set a delayed finishing time.
The time increases when the button is pushed.
The following settings are indicated as the button is
pushed 1
HOUR Reservation off
To cancel delay time, turn the power switch off or push
DELAY WASH button until Reservation off.
(refer to page 20)
• It operates in all program (except BULKY/LARGE)
• During being detected by the sensor, the 'LOAD SENSING'
LED flashes.
• It automatically sensing the quantity of laundries.
• During this step,the washing machine select optimized
washing algorithm.D turns to green.
16
2 3 4 ... 12 14 16 18
1 ...
LODE SENSING
... 24