Dell PowerEdge C5220 Hardware Owner's Manual page 93

Routing the 2.5" SAS Mezzanine Cables
After installing a mezzanine card, you need to route the SAS cabling as
depicted in the following figure.
Figure 3-18. SAS Mezzanine Cable Routing
Removing a SAS Mezzanine Card with 2.5" HDD
Prior to removing a mezzanine card, you must first remove the sled board
from the chassis, see "Removing a Sled" on page 62.
1 Remove the screws securing the assembly.
2 Remove the assembly from the sled.
hard drive ports
Installing System Components
routing path
93