Advertisement
EnviraScape Fe a t u r e s
• Unique water design - Illuminated streams of rain create a unique
visual display.
• Special effects lighting illuminates fountain in red, blue and yellow for
a more dramatic effect.
• The soothing sound of rainfall creates a stress free ambiance.
• Improves concentration by masking distractions so you can stay focused.
• Innovative, artistic design enhances the environment at home or at work.
• Durable water pump can be operated from any indoor
electrical outlet.
• Convenient tabletop size - fountain measures 7.25"L x 4.25"W x 9.75"H.
Assembly and Instructions for Use
1. Unpack the product. Wipe off dust with a damp cloth.
2 . Familiarize yourself with the pump. The pump speed is controlled by the
switch located at the front of the pump. The speed is indicated by a plus
(+) and minus (-) sign. To increase the speed, move the switch slowly in
the direction of the plus sign. You will hear a click as the switch moves to
each speed level. At its highest speed level, the switch will cease to move
any further. To decrease the pump speed, move the switch toward the
minus sign. Similarly, at its lowest speed, the switch will cease to move
any further. NOTE: It is recommended the pump be set at its highest
speed during assembly and later adjusted to a lower
setting if desired. Be sure to unplug the pump before adjusting the
speed setting.
Figure 1
Fountain Top
Water Flow
Dial
Tube
Pump
Cord Slot
Cleaning Pin
4
Rainfall
Holes
Lights
Waterproof
Mat
Adaptor
On/Off Switch
3. Lead the cord through the cord slot on the bottom of the base.
This will ensure that the unit is balanced when placed on a flat surface.
Attach the A/C adaptor jack to the base power cord. DO N O T plug into
outlet at this time (Fig. 1).
4. Insert the tube on the bottom side of the fountain into the pump (Fig. 2).
5. Set the fountain top onto the base so it sits level. NOTE: Ensure the foun-
tain is on a horizontal surface on top of the black waterproof mat provided.
6. Fill base with tap water to 1/2" from top. We recommend using distilled
water to prevent mineral build up (Fig. 3).
7. Plug the cord into 120V household outlet. The fountain is controlled
by the switch located on the power cord. If pump doesn't operate, rotate
in-line switch once to turn "on" and once more to turn "off" .
8 . To adjust rainfall speed, turn the water flow dial (Fig 1) clockwise to
increase the rainfall and counter-clockwise to decrease.
Monthly maintenance will add to your pump's life. NOTE: Ensure that the
electrical cord loops below the electrical outlet to form a 'Drip Loop'. This
will prevent water from running down the cord into the electrical outlet.
Figure 2
Insert tube
into pump
Figure 3
Fill with water
1/2" from top
5
Advertisement
