Miele H 5981 BP Operating And Installation Instructions page 73

Problem
A fault code
appears in the
display (F +
numbers), and a
polyphonic tune
plays.
If it is not possible to remedy a fault by following the instructions given above,
contact the Service Department. On no account open the appliance casing.
This appliance should only be repaired by a suitably qualified technician
trained by Miele.
Possible cause and remedy
– F 55: Safety switch-off has been triggered. The oven has
switched off automatically as it has been in use for an
unusually long time. The length of time depends on the
oven function selected.
The oven can be used again immediately by switching it
off and back on again.
For all other fault codes please contact the Miele Ser-
vice Department.
Problem solving guide
73