Using The Timer; Setting The Clock; Setting The Wake-Up Timer; Turning The Wake-Up Timer On/Off - Pioneer X-SMC1-K Operating Instructions Manual

11

Using the timer

Chapter 11:
Using the timer

Setting the clock

• Default setting:
1 With the power turned on, press
The current time is displayed on the front panel display.
2 Press again.
is displayed on the front panel display.
3 Press ENTER.
The hour blinks on the front panel display.
Use / to set the hour, then press ENTER.
4
The minute blinks on the front panel display.
Use / to set the minute, then press
5
ENTER.
The newly set value displays for 5 seconds, and then the
setting is completed.

Setting the wake-up timer

1 With the power turned on, press FUNCTION
/ to select an input source.
• iPod, DVD/CD, FM and AUX can be selected as the
input source.
2 Press .
The current time is displayed on the front panel display.
3 Press twice.
is displayed on the front panel display.
4 Press ENTER.
The hour blinks on the front panel display.
• While hour or minute digits are blinking, volume level
can be adjusted.
Use / to set the hour, then press ENTER.
5
The minute blinks on the front panel display.
• While hour or minute digits are blinking, volume level
can be adjusted.
Use / to set the minute, then press
6
ENTER.
Note
1 The sleep timer can be set by pressing SLEEP while the remaining time is displayed.
28
En

Turning the wake-up timer on/off

1 With the power turned on, press
The current time is displayed on the front panel display.
.
2 Press
The newly set value displays for 5 seconds on the front panel.
3 Press ENTER to select
The newly set value displays for 5 seconds, and then the
setting is completed.

Using the wake-up timer

1 Press STANDBY/ON to turn the power off.
2 At the wake-up time, this unit will turn on
automatically and play the selected input
function.
If this unit is not operated for 60 minutes or more after
playback is started by the wake-up timer, power will
automatically turn off (standby mode).
Note
• If at the wake-up time iPod/iPhone is not connected to
this unit or a disc is not inserted, this unit will be turned
to on and not play back the track.
• Some discs may not be played automatically at the wake-
up time.

Using the sleep timer

The sleep timer switches off the unit after a specified time so
you can fall asleep without worrying about it.
• Press SLEEP repeatedly to select a switch off
time.
Choose between 5 min, 15 min, 30 min, 60 min, 90 min or OFF.
The newly set value displays for 3 seconds, and then the
setting is completed.
• If you press SLEEP while the sleep timer is set, the
remaining time will be displayed.
three times.
– The wake-up timer is set to on.
– The wake-up timer is set to off.
1
.
or .