Automatic Network Setup
If you connect a LAN cable in a location that supports DHCP, the Internet Protocol (IP) Settings are automatically
con¿gured.
Please check if a LAN cable is connected ¿rst.
1.
Press the MENU button to display the menu.
Press the
or
button to select "Setup", then press the ENTER
2.
Press the
or
button to select "Network Setup", then press the ENTER
button.
3.
Press the ENTER
button to select "Internet Protocol Setup".
4.
Press the
or
button to select "Auto Setup", then press the ENTER
button.
The Internet Protocol is set automatically.
Select "Network Test" to check the network connectivity.
(Refer to page 86)
Press the EXIT button to exit.
button.
English - 83
Language
: English
Time
Network Setup
V-Chip
Caption
External Settings
Entertainment
: Off
Energy Saving
: Off
PIP
SW Upgrade
Network Setup
Internet Protocol Setup : Auto Setup
Auto Setup
Network Test
Manual Setup
Move
Enter
Return