Optoma EX765 Service Manual page 90

6-3 Setup Procedure (VGA
Port)
Connect all ports
1.
- Power adapter to fixture JP2
- Fixture P1 to PC COM Port
- Fixture P4 to Projector VGA1 in
- Fixture P2 to Projector VGA2 in
- Fixture P3 to Projector DVI
- Power on fixture
- Plug in power cord to unit
Note: Confirm JP3 is in "Close" status.
6-4 DDC Key-In Procedure
(VGA1, VGA2, DVI Interface)
1. Click on "EDID.exe" to execute EDID program.
2. Choose model
- In the port selection bar, please choose the
port you're using. For example: if you use
"COM1," choose COM1 in the port selection.
- Click "Model" to choose the EDID file(*.ini)
and open it.
EX765/EW766/EX765W/EW766W
P
RS232 Cable
P
P4
VGA-VGA Cable

Confidential
Adapter
JP2
P3
DVI-DVI Cable
6-3