Optoma EX762 Service Manual page 58

5-1-� Setup ��rocedure
1. Set up
- Hold on "MENU" and "POWER" buttons
and plug in the power cord.
- The ON/STANDBY LED will be flashing
amber.
- Release "MENU" and "POWER" buttons.
- Connect projector with USB cable.
Note: - The system fan and the lamp will not
operate.
5-1-� US� �river Upgrade
��rocedure
1. Execute Program
(1) Connect projector with PC by USB
cable.
(2) "Found New Hardware Wiszard" picture
will appear on the screen.
(3) Select "Install the software automatically
(Recommended)".
(4) Click "Next".
(5) Searching picture, please wait for
several seconds.
USB port
(3)
EX762/EW762
(2)
(4)
Confidential
5-4