Ddc Key-In Procedure - Optoma HD80 Service Manual

6-4 DDC Key-In Procedure

(DVI Interface)
Setup Procedure
1.
- Unplug VGA to DVI cable from fixture.
- Connect P3 of the fixture with DVI port of
HD80 by DVI to DVI cable.
2. Click "OK" button.
3. "Run" message will appear on the screen.
4. When the EDID program for VGA to DVI
is completed, a message "OK" will appear
on the screen.
HD80/HD80-LV/HD803-LV Series Confidential
6-