Setup Procedure; Install Usb Driver - Optoma HD20 Service Manual

5-1-2 Setup Procedure

1. Plug Power and mini USB cables in the
projector, the ON/Standby LED will display
"Amber".
2. Hold "Enter"and "Right" buttons, press
"Power" button, then release "Power"
button and keep holding "Enter" and "Right"
buttons, release the "Enter" and "Right"
buttons when the power LED flashes in
Amber.
- The PC will ask to install USB driver (only
for the first time). Please refer to 5-1-3
for the installation of USB driver.
Note: The system fan and the light will not
operate.

5-1-3 Install USB Driver

1. Click on the "Found New Hardware Wizard".
- Select "Install from a list or special location
(Advanced)".
- Click "Next".
2. Select "Search for the best driver in these
locations."
- Choose "Include this location in the search".
- Click "Browse".
HD20/HD200X/HD2200/HD20LV
Confidential
5-2