Connecting To A Wireless Network - LG 42LV3700 Owner's Manual

I
36
ENTERTAINMENT
o
NOTE - - - - - - - - - - - - - - . . ,
• If you want to access the Internet directly on
your TV, the broadband internet connection
should always be on.
• If you cannot access the Internet, check
the network conditions from a PC on your
network.
• When you use
Network Setting,
check the
LAN cable or check if DHCP in the router is
turned on.
• If you do not complete the network settings,
the network may not work properly.
Connecting to a wireless network
The LG Wireless LAN for Broadband/DLNA
Adaptor, which is sold separately, allows the TV to
connect to a wireless LAN network.
The network configuration and connection method
may vary depending on the equipment in use
and the network environment. Refer to the setup
instructions supplied with your access point or
wireless router for detailed connection steps and
network settings.
Setting up the AP (Access Point) or the wireless
router is required before connecting the TV to the
network. The easiest method is the WPS button
method (Third method in this section).
(LW9500 series: Built-in the Wi-Fi Module,
Unnecessary
Wireless LAN for BroadbandIDLNA
adaptor
setup)
o
NOTE
----------~
• For enjoying pictures, music, or video stored
on a PC using the router, a wired connection
is recommended.
• When the wireless port of the router is used,
there may be restrictions on some functions.
• It is recommended that an Access Point (AP)
be located more than 1 m (3.28 ft) away
from the TV. If the AP is installed closer than
1 m, the magic motion remote control may
not perform as expected due to frequency
interference.