Sony VAIO Fit 13A User Manual page 430

Personal computer
Table of Contents

Advertisement

User Guide
Troubleshooting
Personal Computer
VAIO Fit 13A/14A/15A
What should I do if my computer screen goes blank?
Make sure your VAIO computer is on and not in a power saving mode. See
Make sure your VAIO computer is securely plugged into an AC outlet. If the computer is equipped with the power
indicator, make sure it is on. See
The computer screen may be off.
Press any key on the keyboard.
The display output may be set to an external display.
Press the Fn+F7 keys several times to select your desired display output, and then press the Enter key. See
Selecting Display Modes
If you wait for a while and the computer screen remains blank, follow the procedures below:
Press and hold down the
power indicator, check that it is off, and then turn on the computer.
If the problem persists, press and hold down the
is equipped with the power indicator, check that it is off. Disconnect all cables and peripheral devices, such as the power
cord and the USB device, and wait about five minutes. Then, put them back in place and turn on the computer again.
SVF13N2/SVF14N2/SVF15N2
Connecting a Power Source
for more information.
(Power) button for more than 4 or 10 seconds. If your VAIO computer is equipped with the
for more information.
(Power) button for more than 4 or 10 seconds. If your VAIO computer
Notes on use
Copyright 2013 Sony Corporation
430
Using Sleep Mode
for more information.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents