Philips FW-C30 Service Manual page 16

ADDITIONAL FEATURES FOR FW-C30/21/21M
PREPARATION
Rear Connections
L R
FM Wire Antenna
Connection
Connect the supplied FM wire antenna to
the FM AERIAL (FM ANTENNA) 75 Ω
terminal. Adjust the position of the FM
antenna for the best reception.
Outdoor Antenna
For better FM stereo reception, connect an
outdoor FM antenna to the FM AERIAL (FM
ANTENNA) 75 Ω terminal using a 75 Ω
dipole wire.
FM AERIAL 75Ω FM ANTENNA 75Ω
OR
MW TUNING GRID
Changing the MW tuning grid
(not available for version /30)
The frequency step can be changed if
necessary. In North and South America, the
frequency step between adjacent channels
in the MW band is 10 kHz. In other parts of
the world, it is 9 kHz. The frequency step
preset in the factory is 9 KHz.
For MW Band
To change from 9 kHz to 10 kHz or vice
versa
Changing of tuning grid will erase all
previously stored preset stations.
1 Disconnect the system from the AC
power supply (pull out the AC power
cord) .
2 Press and hold TUNER and TUNING
á while reconnecting the system to
the AC power supply.
™ Display will show "GRID 10" or
"GRID 9".
Notes:
– GRID 9 indicates that the tuning grid is
in step of 9 kHz in MW band. GRID 10
indicates that the tuning grid is in step
of 10 kHz in MW band.
– FM tuning grid will also be changed
from 50 kHz to 100 kHz or vice versa. All
preset stations will also be erased.
2
PCS 103 341
FM AERIAL
75Ω
+
AM ANTENNA
R
–
–
VOLTAGE VOLTAGE
L
SELECTOR SELECTOR
220V- 110V-
+ 240V 127V
220V-
110V-
240V
127V
AC
MAINS
~
SUBWOOFER
OUT
AUX IN
HIGH POWER SUBWOOFER
AUDIO OUT
Adjusting the Operating
Voltage
(not available for version /30)
Before connecting the AC power cord to
the wall outlet, make sure that the voltage
selector at the rear of the system is set to
the local power line voltage. If not, reset
the selector before connecting to the wall
outlet.
KARAOKE
MICROPHONE - LEVEL
Microphone Mixing
(not available
for version /30)
1 Set the MIC LEVEL control to the
minimum level to prevent acoustic
feedback (e.g. a loud howling sound)
before you connect the microphone.
2 Connect a microphone to the MIC
socket.
3 Press CD, TUNER, TAPE or AUX.
4 Play the selected source.
5 Adjust the volume level with VOLUME
control.
6 Adjust the MIC LEVEL control to the
mixing level that you want.
7 Start singing or talking through the
microphone.
2-10
CONTROLS
DISC 1
DISC CHANGE
C H A N G E R
C10
FW- MINI HIFI SYSTEM
STANDBY-ON
JOG C D 1 • 2 • 3 BAND
CONTROL
CD TUNER
OPTIMAL
TUNING
JAZZ
SEARCH STOP• CLEAR
ROCK PROGRAM CLOCK•TIMER
MICROPHONE - LEVEL
TECHNO
SOUND NAVIGATION - JOG
TAPE
PLAY/REC
STANDBY ON
E
MIN MAX
CUT OFF FREQUENCY
60Hz 150Hz
FULL AUTO STOP
MIC LEVEL (not available for version
/30)
– to adjust the mixing level for karaoke
or microphone recording.
MIC (not available for version /30)
– to connect microphones jack.
DISC 2 DISC 3
OPEN • CLOSE
3 CD ROTARY CHANGER SYSTEM •
•
CD REWRITABLE COMPATIBLE
CD SYNCHRO RECORDING •
TAPE 1 • 2 VIDEO
TAPE
AUX
▲
PRESET ▲
PLAY• PAUSE PREV NEXT
DIM
VOLUME
TAPE
PLAYBACK
2
CD TAPE 1/2 TUNER
DIM AUX SLEEP
CD DIRECT
1 2 3
PAUSE
REPEAT SHUFFLE
Å
VOLUME
É
í ë
Ç
à á
MUTE
DSC DBB
1