Connection Method - Sharp IV-08MP Instruction Manual

[1] Connecting to the controller (IV-S51M)
When the controller (IV-S51M) is directly connected, follow the instruction below to connect the con-
troller to the IV-08MP.
(1) When directly connected
Remove the connector cover from the main housing of IV-S51M.
Fit the tab A of the IV-08MP in the notch part of the IV-S51M.
To connect them, press the IV-S51M in place in the direction of the arrow so that the tab B is fit into
the notch part. Make sure that the connectors of both units are firmly connected.

6. Connection Method

Connector cover
Tab A
Tab B
6 - 1