Seagate Momentus 5400.3 ST9160821A Product Manual page 18

Table 1: Specifications for 60 and 40 Gbyte models
Drive specification
Shock, nonoperating (Gs max at 1 msec)
Shock, nonoperating (Gs max at 0.5 msec)
Vibration, operating
(max displacement may apply below 10 hz)
Vibration, nonoperating
(max displacement may apply below 22 hz)
Drive acoustics, sound power (bels), 2 disc
Idle**
Performance seek
Nonrecoverable read errors
Annualized Failure Rate (AFR)
Load/Unload (U/UL) cycles
25°C, 50% relative humidity
32°C, 80% relative humidity
5°C, 80% relative humidity
5°C, 20% relative humidity
60°C, 20% relative humidity
Warranty
*One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment
and formatting.
**During periods of drive idle, some offline activity may occur, according to the S.M.A.R.T. specification, which may increase acoustic and
power to operational levels.
***Typical notebooks will pull power to the drive when entering S3 and S4; while in the S3 and S4 states, drive sleep and drive standby
modes will not contribute to battery power consumption.
8
ST960815A
900
400
1.0 Gs (0 to peak, 5–500 Hz)
5.0 Gs (0 to peak, 5–500 Hz)
2.4 (typical)
2.6 (max)
2.9 (typical)
3.1 (max)
14
1 per 10 bits read
<0.60%
600,000 software-controlled power on/off cycles
20,000 hard power on/off cycles
600,000 software-controlled power on/off cycles
20,000 hard power on/off cycles
5 years on distribution units.
To determine the warranty for a specific drive, use a web
browser to access the following web page:
www.seagate.com/support/service/
From this page, click on the "Verify Your Warranty" link. You
will be asked to provide the drive serial number, model num-
ber (or part number) and country of purchase. The system
will display the warranty information for your drive.
Momentus 5400.3 PATA Product Manual, Rev. A
ST940815A