Adjusting Your Monitor Image; Using The Direct Access Controls; Using The On-Screen Display (Osd) Controls - Lenovo ThinkVision E2323 User Manual

Adjusting your monitor image

This section describes the control features to adjustyour monitor image.

Using the direct access controls

The direct access controls can be used when the On Screen Display (OSD) is not displayed.
Table 2-1. Direct access controls
Icon

Using the On-Screen Display (OSD) controls

To adjust the settings, the user controls can be viewed through the OSD.
To use the controls:
1. Press
2. Use
3. Press
4. Press and hold
5. Enables DDC/CI by default. Use OSD Exit Key, Press and hold the
© Copyright Lenovo 2013. ©
Control
Input Change
DDC-CI
Exit
Image Setup
Brightness
Menu
to open the main OSD menu.
or to move among the icons. Select an icon and press
function. If there is a sub-menu, you can move between options using
press to select that function. Use
to move backwards through the sub-menus and exit from the OSD.
for 10 seconds to lock the OSD. This will prevent accidental
adjustments to the OSD. Press and hold
allow adjustments to the OSD.
seconds to disable / enable DDC/CI function. The words "DDC/CI disable"or"DDC/CI
enable" shows on the screen.
Description
Switches the video input source.
Press and hold for 10 seconds to enable or disable the
DDC-CI function
Exit from menu
Activates automatic image adjustment.
Direct access to Brightness adjustment.
Enter menu
or to make adjustments. Press
for 10 seconds to unlock the OSD and
to access that
or , then
to save.
button for 10
Chapter 2. 2-3