Digital Audio Output Connection - Philips 49PFL4909 User Manual

Connecting the TV to the Internet using a Wireless LAN
Broadband router Broadband router Broadband router
Note(s)
After you made the wireless connection, set up necessary network settings. Network L
●
p. 39
Use a Wireless LAN Access Point (AP) (e.g. wireless router) which supports IEEE 802.11
●
b/g/n. (n is recommended for stable operation of the wireless network.)
This unit does not support Ad-hoc mode.
●
Other radio devices or obstacles may cause interference to the wireless network
●
connection.

Digital Audio Output Connection

If you connect this Unit to an External Digital Audio Device, you can enjoy
multi-channel Audio like 5.1ch Digital Broadcasting sound.
Use a Digital Audio Coaxial Cable to connect the Unit to External Digital
Audio Devices.
Digital Audio Coaxial cable Digital Audio Coaxial cable Digital Audio Coaxial cable
OUT OUT OUT
Internet
Network provisioning
equipment
LAN
Ethernet cable
WLAN
IN IN IN
Digital Home
Theater Amplifier
PC Connection
HDMI Connection
This Unit can be connected to your PC that has an HDMI terminal.
Use an HDMI cable for this Digital Connection.
IN
HDMI cable
HDMI-DVI Connection
This Unit can be connected to your PC that has a DVI Terminal.
Use an HDMI-DVI Conversion Cable for this Video Digital Connection
and it requires Stereo mini 3.5mm Plug Audio Cable for Analog Audio
signal as well.
IN
HDMI-DVI
conversion cable
IN
Stereo Mini 3.5 mm Plug Audio cable
VGA Connection
This unit is equipped with a PC Input jack. If you connect this Unit to your
PC, you can use this Unit as a PC monitor.
Use a VGA cable for this Video Connection and it requires a Stereo mini
3.5mm Plug Audio Cable for Analog Audio signal as well.
VGA cable VGA cable VGA cable
IN
IN
Stereo Mini 3.5 mm Plug Audio cable Stereo Mini 3.5 mm Plug Audio cable Stereo Mini 3.5 mm Plug Audio cable
17 .
English
OUT
PC
OUT
PC
OUT
PC
OUT
Continued on next page.