Other Features; Adjust Volume Level; Set The Alarm Timer; Set The Sleep Timer - Philips DTB297 User Manual

6 Other features

Adjust volume level

1
During play, press VOL +/- to increase/
decrease the volume level.

Set the alarm timer

You can set two alarms which go off at different
time.
1
Make sure that you have set the clock
correctly (see 'Set time and date' on page
9).
2
Press and hold ALARM 1 or ALARM 2 for
2 seconds.
» The unit beeps.
» [SET AL] (set alarm),
hour digits start to blink.
3
Press TUNING +/-
then press OK/
» The minute digits start to blink.
4
Repeat step 3 to set the minute, alarm
date (work day, daily, or weekend), source
(DOCK, BUZZ, DAB, or TUNER), and
volume.
» After confirmation of the volume
setting, the unit beeps once again.
Activate and deactivate the alarm
timer
1
Press ALM 1 or ALM 2 repeatedly to
activate or deactivate the timer.
» If the timer is activated,
displayed.
» If the timer is deactivated,
disappears.
EN
14
or , and the
/ to set the hour,
to confirm.
or is
or
Repeat alarm
• When the alarm rings, press
BRIGHTNESS/REP ALM.
» The alarm repeats ringing in several
minutes.
Stop alarm ringing
• When the alarm rings, press the
corresponding ALARM 1 or ALM 2
button.
» The alarm stops but the alarm settings
remain.
View the alarm settings
Press ALARM 1 or ALM 2.
•

Set the sleep timer

This unit can switch to standby automatically
after a set period of time.
• Press SLEEP repeatedly to select a set
period of time (in minutes).
» When the sleep timer is activated, the
display shows
gradually decrease in the last 5 minutes.
To deactivate sleep timer
Press SLEEP repeatedly until [OFF] (off) is
•
displayed.
» When the sleep timer is deactivated,
disappears on the display.

Adjust display brightness

Press BRIGHTNESS/REP ALM repeatedly
•
to select different levels of display
brightness.
, and the volume will