Advertisement
Quick Links
HASF2018
IMPORTANT INSTRUCTIONS
When using electrical appliances, basic safety precautions should always
be taken including the following:
• Use fan only for purposes described in the instruction manual.
• To protect against electrical shock do not immerse unit, plug, or cord in
water or spray with liquids.
• Close supervision is necessary when any appliance is used by or near
children.
• Unplug from outlet when not in use, when moving fan from one location
to another, before putting on or taking off parts, and before cleaning.
• Avoid contact with moving parts.
• Do not operate in the presence of explosive and/or flammable fumes.
• Do not place fan or any parts near an open flame, cooking or other
heating appliance.
• Do not operate any appliance with a damaged cord, plug, after the
appliance malfunctions, or has been dropped/ damaged in any manner.
• The use of attachments not recommended or sold by the appliance
manufacturer may cause hazards.
• Do not use outdoors.
• Do not let the cord hang over the edge of a table, counter, or come in
contact with hot surfaces.
Page1
3-SPEED OSCILLATING
18" STAND FAN
Owner's Guide
PLEASE READ AND SAVE THESE INSTRUCTIONS
• To disconnect, grip plug and pull from wall outlet. Never yank on cord.
• Always use on a dry, level surface.
• Do not operate without fan grills properly in place.
• This product is intended for household use ONLY and not for commer-
cial or industrial applications.
WARNING: To reduce the risk of fire or electrical shock, DO NOT
USE THIS FAN with any SOLID STATE Fan Speed Control Device
PLEASE READ AND SAVE THESE INSTRUCTIONS
THIS PRODUCT IS EQUIPPED WITH A POLARIZED
A.C. (Alternating Current) PLUG (a plug having one
blade wider than the other). This plug will fit into
the power outlet only one way. This is a safety fea-
ture. If you are unable to insert the plug fully into
the outlet, try reversing the plug. If the plug should
still fail to fit, contact an electrician to replace the obsolete outlet.
DO NOT DEFEAT THE SAFETY PURPOSE OF THIS POLARIZED PLUG
Advertisement
Related Manuals for Holmes HASF2018
Summary of Contents for Holmes HASF2018
- Page 1 • Avoid contact with moving parts. • Do not operate in the presence of explosive and/or flammable fumes. • Do not place fan or any parts near an open flame, cooking or other heating appliance. • Do not operate any appliance with a damaged cord, plug, after the appliance malfunctions, or has been dropped/ damaged in any manner.
-
Page 2: Fan Head Assembly
STEP 2. Fasten the rear grill in place using the rear grill mounting nut. Turn the nut clockwise and tighten firmly. STEP 3. Slide the fan blade, with the hollowed interior of the blade facing towards the rear grill firmly onto the motor shaft. Make sure the motor shaft pin lines up with the recessed groove in the back of the fan blade. -
Page 3: Fan Blade Cleaning
Step 2: Adjust the pole to the desired height, and firmly tighten the Base Collar in a clockwise direction. CLEANING/MAINTENANCE INSTRUCTIONS: Follow these instructions to correctly and safely care for your Holmes Products stand fan. Please remember: • Always unplug the fan before cleaning or disassembling. - Page 4 E. All parts of this Holmes product are guaranteed for a period of 3 years as follows: 1. Within the first 30 days from date of purchase, the store from which...