Keyboard Assembly; Headphone Hanger Assembly - Behringer Concert CDP2400USB Assebly Instructions

4
4.

Keyboard Assembly

Headphones
Jacks
Pedal adjuster
1) Position the holes at the bottom of the Keyboard against the holes in the side panel brackets.
2) Use four screws 6 to fasten the Keyboard.
3) Insert the pedal cable connector into the pedal jack located at the rear of the Keyboard.
◊ Be sure that the connector is inserted in the correct orientation. Make sure that the cable clamp fastens to the pedal cable.
◊ Rotate the pedal adjuster until it comes in firm contact with the floor surface. If the adjuster is not in firm contact with the
floor, the pedal will wobble and cause malfunctions.
5.

Headphone Hanger Assembly

1) Use two screws 9 to fasten the Headphone Hanger 10 to the underside of the Keyboard.
CONCERT CDP2400USB Assembly Instructions
Screws to fasten the
keyboard with side
panel