VEC223F Deluxe Console Travel Cooler ® A N D W A R M E R OPERATES FROM ANY VEHICLE’S 12 VOLT ACCESSORY SOCKET OR 12 VOLT DC PORTABLE POWER SUPPLY. OWNER’S MANUAL & WARRANTY INFORMATION IMPORTANT SAFETY INFORMATION, SAVE THESE INSTRUCTIONS THIS MANUAL CONTAINS IMPORTANT INFORMATION REGARDING THE OPERATION AND WARRANTY OF THIS PRODUCT.
Page 2
For extended use: No need for a refrigerator, stove or 120 volt AC outlet, simply plug the Vector ® Deluxe Console Thermoelectric Travel Cooler & Warmer into vehicle’s 12 volt DC accessory outlet to keep food and drinks cold or warm.
IMPORTANT SUGGESTIONS: Vector’s Thermoelectric Cooler/Warmer cools like a refrigerator and warms like an oven. For best performance, plug in the unit approximately 30 minutes before loading to give it time to warm up or cool down. Always try to fill your unit with pre- chilled or pre-heated food or beverages, as the unit will always perform at its best when you do this.
® return/replacement instructions. This unit is not user-serviceable, it must be returned to Vector Manufacturing for professional service or repair. Any attempt to service by user will void warranty. - Cooler/warmer is not cooling or heating, but fan is turning •...
With a current draw of approximately 4-amps (48-watts), the unit will operate for approximately 50 minutes from a fully charged 12 volt DC portable power supply such as the Vector Pocket Power™ or Pocket Generator™. A standard 17 Ampere Hour Jump-starter/Power Supply such as the VEC021 series - can operate the cooler/warmer for approximately 6 hours.
Page 6
• Use only with the supplied power cord. If cord becomes worn or damaged, discontinue use and call Vector® Customer Service department for authorized replacement. • Never allow the cooler/warmer to be immersed in water or other liquid.
USING THE TRAVEL COOLER/WARMER AS A COOLER Connecting to a vehicle’s 12 volt DC accessory outlet, for extended use: 1. Make sure that the unit’s COOL/WARM/OFF switch is in the OFF position. Start vehicle, or turn ignition to “accessory” position. 2.
USING THE TRAVEL COOLER/WARMER AS A WARMER - Make sure that the unit’s COOL/WARM/OFF switch is in the OFF position. Start vehicle, or turn ignition to “accessory” position. - Insert the DC plug into the vehicle’s 12 volt DC accessory outlet. - Move the COOL/WARM/OFF switch on the cooler to the WARM position.