Troubleshooting; Acoustic Features; My Ipod Is In The Dock And Playing, But I Can’t Hear Any Music; There Isn’t A Universal Dock Adapter For My Ipod - Logitech Pure-Fi Elite User Manual

High-fidelity, all-in-one speaker system designed for the apple ipod
Hide thumbs Also See for Pure-Fi Elite:
Table of Contents

Advertisement

Available languages

Available languages

Acoustic Features

The Pure-Fi Elite
system uses an advanced, high-fidelity acoustic design. The acoustic system uses:
• (2) 1" ventilated soft-dome tweeters
• (2) 4" reinforced high-power, long-throw, polypropylene woofers
Pure-Fi Elite
's sound field can be adjusted to your personal listening preferences — using the bass,
treble and StereoXL adjustments described above.
11
English

Troubleshooting

My iPod is in the Dock and playing, but I can't hear any music.
• Make sure that Pure-Fi Elite
is on.
• Make sure that the iPod input is selected.
• Make sure that the volume level on Pure-Fi Elite
to adjust.
• Try turning off the Sound Check feature on your iPod.
• Download the latest version of iTunes (available at apple.com) and upgrade your iPod to the
latest iPod fi rmware.
• To test the iPod output, try with headphones.
There isn't a Universal Dock adapter for my iPod.
• If you have a newer iPod, a Universal Dock adapter for your iPod should have been included with your iPod
when you purchased it.
• If you have a 1st, 2nd, or 3rd generation iPod, you need to use the Aux input connector on the back of
Pure-Fi Elite
. (1st / 2nd generation iPod models do not have a dock connector. 3rd generation iPod models
are not supported by the Pure-Fi Elite
's Universal Dock.)
The AM radio reception is poor.
• Use the external AM antenna.
• Make sure to disconnect the wires for the internal AM antenna before connecting the external antenna.
The FM radio reception is poor.
• Use the external FM antenna.
• Make sure that the antenna is fully extended. Leaving the antenna coiled up will result in poor reception
Music played through the Aux input sounds distorted.
• Make sure the cable is completely plugged into Pure-Fi Elite
• Turn down the volume level on your source device.
The remote isn't working.
• Point the remote directly at Pure-Fi Elite
.
• Make sure the remote sensor isn't being blocked. (It is located below the iPod.)
• Try using a fresh set of batteries.
is at least half way up. Use (
/
) on the speaker
and your source device.
12
English

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents