Download Print this page
Bush BFSAT01HD Quick Start
Bush BFSAT01HD Quick Start

Bush BFSAT01HD Quick Start

Hd freesat receiver
Hide thumbs Also See for BFSAT01HD:

Advertisement

Welcome to digital TV
A digital receiver lets you access digital
channels that are broadcast in the UK. It
uses a digital signal, received through your
satellite dish and lets you watch it through
your existing television.
The big switchover
Over the next 4 years, the old analogue TV
signal is gradually being switched off. Soon
you'll only be able to watch television with a
digital receiver.
www.digitaluk.co.uk also offers information
about when the analogue signal is being
switched off in your area.
*A HD freesat receiver and HD Ready TV are required to receive HD content.
Need extra information or help setting up?
You may find the information
you are looking for on our
website.
www.bushdigital.co.uk
or on the freesat website.
www.freesat.co.uk
Rev3-140308
BFSAT01HD QSG-Rev3-140308.pmd
1
For a one off payment, you can buy a
freesat receiver, satellie dish and installation
giving you over 80 channels covering the
best of TV and more. In addition, freesat will
also provide HD content* from
broadcasters including the BBC and ITV.
If you still need help or
information you can phone our
call centre on:
0871 230 4695
Calls are charged at 10p per minute when called from
a BT landline. Call charges may vary if using other
networks.
BFSAT01HD
HD freesat receiver
3/14/2008, 4:16 PM
Start here

Advertisement

loading

Summary of Contents for Bush BFSAT01HD

  • Page 1 0871 230 4695 www.bushdigital.co.uk Calls are charged at 10p per minute when called from a BT landline. Call charges may vary if using other or on the freesat website. networks. Start here www.freesat.co.uk Rev3-140308 BFSAT01HD QSG-Rev3-140308.pmd 3/14/2008, 4:16 PM...
  • Page 2 Your freesat receiver will now autotune. If the problem persists, check all the previous character. Press the OK button to connections between the dish and the receiver. continue. BFSAT01HD QSG-Rev3-140308.pmd 3/14/2008, 4:16 PM...