Electrical Specifications
Voltage: 120 VAC
Power (current) during start-up: 438 watts (3.65A)
Power (current) during operation: 370 watts (3.08A)
Fuel
This heating appliance was designed to burn wood pellets that comply with the standards set by
the Pellet Fuels Institute
•
Minimum density of 40 pounds/cubic foot
•
Maximum length of 1.5"
•
Pellet diameter between 1/4" and 5/16"
•
Fines that will pass through 1/8" screen not to exceed 0.5% by weight
•
Salt content no more that 300 parts per million
•
Ash content no more than 3% by weight (standard grade pellets)
•
Moisture content less than 8% by weight
If the fuel being burned does not comply with these minimum standards, the appliance may not
operate as designed and may be cause to negate the warranty.
Packaging
Included with your assembled Buffalo Pellet Stove Model B100 are the following items
Owner's Installation and Operations Manual
Power cord
Thermal sensing cable (standard length – 10')
Artificial log
Optional Accessories
Thermal sensing cable (length 25')
Thermal sensing cable (length 50')
Extended hopper
Fresh air intake damper
Page 6 of 37