Table of Contents
Advertisement
GA-8EGXR Motherboard
C Floppy Drive A/B
This category identifies the type of floppy disk drive A or drive B that have been installed in the
computer.
No floppy driv e installed
8None
81.2MB, 3.5 in.
3.5 inch AT-ty pe high-density driv e; 1.2M by te capacity
8720K, 3.5 in.
3.5 inch double-sided driv e; 720K by te capacity
81.44M, 3.5 in.
3.5 inch double-sided driv e; 1.44M by te capacity .
82.88M, 3.5 in.
3.5 inch double-sided driv e; 2.88M by te capacity .
C IDE Primary Master, Slave / Secondary Master, Slave
The category identifies the types of hard disk from drive C to F that has been installed in the computer.
There are two types: auto type, and manual type. Manual type is user-definable; Auto type which will
automatically detect HDD type.
Note that the specifications of your drive must match with the drive table. The hard disk will not work
properly if you enter improper information for this category.
If y ou select User Type, related information will be asked to enter to the following items. Enter the
information directly from the keyboard and press <Enter>. Such information should be provided in the
documentation form your hard disk vendor or the system manufacturer.
} TYPE
1-50: Predefined ty pes.
Users: Set parameters by User.
Auto: Set parameters autom atically. (Default Vaules)
CD-ROM: Use for ATAPI CD-ROM driv es or double click [Auto] to set all HDD parameters
automatically .
8Cy linders
8Write Precompensation
8Sectors
8Max imum Capacity
8LBA Mode
8Block Mode
Number of cy linders
Write precompensation
Number of sectors
Max imum Capacity
This field show s if the dev ice ty pe in the specific IDE channel
support LBA Mode
This field only show s the information of Block Mode.
28
Advertisement
Table of Contents
