Page 1
GiiNii NuLife 2.4-inch LCD “Full Size” Photo Scanner User Manual • Before operating this product, carefully read and follow the instructions. • Please retain this user manual for future reference.
- Using the Photo Protective Sleeve............9 - Scanning Images................9 - Playing back and Scanned Images..........10 - Zoom..................11 - Playback Setting................12 TRANSFERRING THE SCANNED IMAGES TO PC..13 - Disconnecting the Scanner from PC..........13 CLEANING AND CALIBRATING THE SCANNER..14 SPECIFICATION............16 HELPFUL HINTS............16 GiiNii 90 DAY LIMITED WARRANTY......17...
SAFETY INFORMATION • Retain this User Manual for future reference. • Read the safety and operating instructions carefully before using the product. All warnings on the product and in the operating instructions should be observed. • Do not place this product under direct sunlight or near heat sources, such as in a closed car under sunlight or near a stove.
Thank you for purchasing this GiiNii NuLife 2.4-inch LCD “Full Size” Photo Scanner. With this new standalone scan-and-view technology, scanning is easy! There is no software installation or PC needed. You can preview the scanned images instantaneously on the 2.4” display screen, and store them directly into a MMC or SD memory card.
SCANNER PARTS Top View Rear View Names Descriptions 1 Paper guide • Used to guide the material to be scanned to improve alignment. 2 Feeding slot • Feeds the paper or photo for scanning. 3 2.4” LCD screen • Views the scanned images. 4 Power( )/Menu •...
PRODUCT SETUP Connecting to Power Using AC adapter Connect one end to the scanner’s DC IN jack, and the other to wall socket. To wall socket To DC IN 5V Using mini USB cable as a power source 1. Connect the mini USB connector to the scanner, and the other 2 regular USB connectors to laptop or PC.
Inserting a SD/MMC Card Insert your SD or MMC card into the card slot with the gold contacts facing up. Rear View Turning on the Scanner Press Power ( ) button to turn on the scanner. MENU MENU...
SCAN AND PLAYBACK Scanner Setting 1. Press MENU( ) button to enter the MENU scanner setting menu. 2. Press LEFT /RIGHT button to select Scan ( ) or Setup ( 3. Press UP /DOWN button to select an option from the submenus. Note: Press MENU( ) button MENU...
Using the Photo Protective Sleeve It is recommended to use the supplied photo protective sleeve for photo scanning. Please place the photo inside the protective sleeve. Make sure the sealed end goes fi rst into the feed slot for scanning. Note: Do not use the sleeve for laminated photos.
2. Press Scan ( ) button, the photo or document will be rolled through SCAN and scanned. Note: Wait until scanning is complete. 3. The scanned image will appear on the screen and saved onto the inserted memory card. Note 1: By default the folder \DCIM\100NVtim will be created in the inserted memory card.
3. Press LEFT /RIGHT button repeatedly to move to the previous or the next page. 4. Press UP /DOWN /LEFT /RIGHT button to select an image, and then press OK button to view the image in full screen. Zoom 1. Press ZOOM( ) button to zoom in an image.
Playback Setting 1. Press MENU( ) button to enter the MENU playback setting menu. 2. Press LEFT /RIGHT button to Delete select Playback ( ) or Setup ( Rotate 3. Press UP /DOWN button to select an option from the submenus. Note: Press MENU( ) button MENU...
TRANSFERRING THE SCANNED IMAGES TO PC ATTENTION: To get proper connection with your PC and the unit, please turn the power off before making the connection. 1. Connect the mini USB connector to the scanner, and the master connector to PC. Master connector mini USB Cable (supplied)
CLEANING AND CALIBRATING THE SCANNER • To get high image quality and good recognition results, please perform step 1, 2, 3 in that order prior to use if necessary. • Make sure the cleaning and calibration paper, and cleaning stick are clean without any dust before use.
Page 15
3. Align the feed slot cover. Assembly the edge’s two latching tabs with the mounting holes on the scanner. Push the cover back in until it clicks in place. Step 3: Using the calibration paper 1. Insert the calibration paper with the white side DOWN into the feed slot.
SPECIFICATION Scan Sensor Linear Color CIS Display 2.4” Color TFT LCD (480 x 234 pixels) Scan Size Minimum: 38.1mm x 50.8mm (1.5” x 2”) Maximum: 216mm x 356mm (8.5” x 11”) Scan Speed(A4 size) 10 sec at gray 300dpi 15 sec at color 300dpi Supported OS for Mass Windows XP / Vista / 7 storage...
WHAT IS NOT COVERED – EXCLUSIONS AND LIMITATIONS: This Limited Warranty applies only to the new products that can be identified by the trademark, trade name, or logo affixed to it. This Limited Warranty does not apply to any non-GiiNii hardware product...
Page 18
The Company is not liable for any damage to or loss of any programs, data, or other information stored on any media contained within the product, or any non-GiiNii product or part not covered by this warranty. Recovery or reinstallation of programs, data or other information is not covered under this Limited Warranty.
Page 19
• Failure to operate per Owner’s Manual. TO OBTAIN ASSISTANCE Send an email to customerservice@giinii.com. For technical support call toll free: 1-866-909-3550 R E PA I R O R R E P L A C E M E N T A S P R O V I D E D U N D E R T H I S WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CONSUMER.