Replacing The Remote Control Battery - GiiNii GH-7AWP User Manual

Digital Picture Frame

Replacing the remote control battery

1. On the back of the remote control, press the locking tab to the
right.
2. Pull out the battery holder.
3. Insert the new battery into the holder. The battery must be
placed with the positive charge facing upwards, as shown in
the illustration below.
4. Slide the battery holder into the remote control.
• Failure to replace the battery in the correct manner may damage the
battery.
• Use only the specified battery type.
• Recycle or dispose used batteries properly according to local
guidelines and regulations.
• The batteries are highly flammable, keep away from excessive heat
or moisture.
• If the battery is completely drained or not in use for extended period
of time, remove the battery to prevent leakage.
EN - 10
Positive charge
faces upwards
Operating the Picture Frame