Table of Contents
Advertisement
Display
Raise the flash.
Lens error
Communications error
System error
Printer error: check
printer status.
Printer error: check
paper.
Printer error: paper jam.
Printer error: out of
paper.
Printer error: check ink.
Cause/Solution
The flash is lowered.
Raise the flash when shooting in Night portrait or
Backlighting (when HDR is set to k) scene mode.
The lens cap may be attached, or a lens error occurred.
Make sure that the lens cap has been removed, and turn the
camera off and then on again. If the error persists, contact
your retailer or Nikon-authorized service representative.
An error occurred while communicating with the printer.
Turn the camera off and reconnect the USB cable.
An error occurred in the camera's internal circuitry.
Turn the camera off, remove and reinsert the batteries, and
turn the camera on. If the error persists, contact your retailer
or Nikon-authorized service representative.
After solving the problem, select Resume and press the
k button to resume printing.*
Load the specified size of paper, select Resume, and press
the k button to resume printing.*
Remove the jammed paper, select Resume, and press the
k button to resume printing.*
Load the specified size of paper, select Resume, and press
the k button to resume printing.*
There is a problem with the printer's ink.
Check the ink, select Resume, and press the k button to
resume printing.*
A
33, 35,
44
4, 20
E19
12, 20
–
–
–
–
–
E75
Hide quick links:
Advertisement
Table of Contents
