Chevrolet Tahoe Owner's Manual page 280

9-16 Driving and Operating
Tire and Loading Information
Label
Label Example
A vehicle specific Tire and
Loading Information label is
attached to the center pillar
(B-pillar). With the driver door
open, you will find the label
attached below the door lock
post (striker). The tire and
loading information label shows
the number of occupant seating
positions (A), and the maximum
vehicle capacity weight (B) in
kilograms and pounds.
The Tire and Loading
Information label also shows the
size of the original equipment
tires (C) and the recommended
cold tire inflation pressures (D).
For more information on tires
and inflation see
and
.
There is also important loading
information on the vehicle
Certification/Tire label. It tells
you the Gross Vehicle Weight
Rating (GVWR) and the Gross
Axle Weight Rating (GAWR) for
the front and rear axles. See
Certification/Tire Label later in
this section.
Steps for Determining Correct
Load Limit
Locate the statement "The
1.
combined weight of
occupants and cargo should
never exceed XXX kg or
XXX lbs." on your vehicle s
placard.
Determine the combined
2.
weight of the driver and
passengers that will be riding
in your vehicle.
Subtract the combined
3.
weight of the driver and
passengers from XXX kg or
XXX lbs.
The resulting figure equals
4.
the available amount of cargo
and luggage load capacity.
For example, if the "XXX"
amount equals 1400 lbs. and
there will be five 150 lb
passengers in your vehicle,
the amount of available cargo