Cable Box Connections - Sony Trinitron KV-27FS120 Service Manual

Cable Box Connections

Some cable TV systems use scrambled or encoded signals that require a cable box to view all
channels. If you subscribe to that kind of cable service, use this connection.
TV and Cable Box
1
From cable/
antenna
1
Connect the coaxial cable from your cable service to the IN jack on your cable box.
2
Connect a coaxial cable (not supplied) from the OUT jack on your cable box to the
VHF/UHF jack on your TV.
Using your TV with this connection
This connection allows you to do the following:
Program your Sony remote control to operate your cable box (see page 5).
To activate your remote press
then use the
0 9
program your remote control, then use the Channel Fix feature to set your TV to channel 3
or 4 (see page 31).
12
Cable box
LINE
IN
LINE
OUT
2
(FUNCTION button) to operate your cable box and
buttons or CH+/- buttons to change the channels. To do this, first
VIDEO AUDIO L AUDIO R
Rear of TV
1 3 4
Y
S VIDEO
P
B
P
R
VIDEO
L
(MONO)
R