Co Line Group Access - Panasonic KX-TDA50 User Manual

CO Line Group Access

PT/SLT/PS PT and SLT
Off-hook.
Press G-CO or enter CO
line group access number
and then CO line group
number (2 digits).
To select the specified CO line
PT and SLT PT/PS
Off-hook. Press S-CO .
• Each of the S-CO button or G-CO button light shows the current status as follows:
Off: The line is idle.
Red on: The line is in use.
• You may be restricted from making a call to the specified outside party. To make a call, refer to
"1.2.6 Calling without Restrictions".
• To confirm number before dialing, you can enter a phone number and confirm it on the display
and then go off-hook. (Predialing)
• To make a call to another party without going on-hook, press the FLASH/RECALL button. It
will re-access the CO line and provide external dial tone. Pressing the Terminate button will
provide intercom dial tone. You can dial the new phone number without going on/off-hook.
• Hands-free Operation
You can make an outside call and have a conversation in hands-free mode using the SP-PHONE
button.
Customizing Your Phone
• 3.1.2 Settings on the Programming Mode—Preferred Line Assignment—Outgoing
Select the seized line when going off-hook.
• 3.1.3 Customizing the Buttons
Create or edit a Loop-CO (L-CO) button, a Group-CO (G-CO) button, a Single-CO (S-CO)
button or a Terminate button.
(G-CO)
OR
CO line
8
group no.
outside
(S-CO) phone no.
Dial outside
phone number .
outside
phone no.
Dial outside phone
number .
Talk.
1.2 Making Calls
Talk.
User Manual 27