TP-Link MC100CM User Manual page 11

Name Status
PWR
LFP
FX
Link/Act
Flashing
SPD
Flashing
FDX/Col
TP
Flashing
Link/Act
On Power on
Off Power off
On The Link Fault Pass Through function enable.
Off The Link Fault Pass Through function disable.
On There's a valid link.
The converter is receiving or transmitting
data from the fiber optic connector.
Off There's no valid link.
The TP port is connected to 100Base-Tx
On
The TP port is connected to 10Base-Tx
Off
device or no connection.
The TP port is operating in Full-Duplex
On
There's a collision.
Off The TP port is operating in Half-Duplex mode.
On There's a valid link.
The converter is receiving or transmitting
data from the TP port.
Off There's no connection on the TP port.
5
Indication