Video Snapshot - Canon LEGRIA HF R46 Instruction Manual

1 Touch [Ü] to open the [Select Image] screen and then touch [ON].
2 Touch [+] or [-] to select a different image mix frame.
:/9/8 You can touch one of the memory icons at the
bottom of the screen to read image mix frames saved on a different
memory (only when recording on or playing back scenes from a
memory card).
3 Touch [K] to mix the selected frame with the live video.
Decorating Scenes during Playback
Operating modes:
1 From the index screen (A 49), play back the scene you want to
decorate.
2 Touch the screen to display the playback controls.
3 Touch [Ò] to open the decoration screen.
4 Decorate the scene using the tools from the toolbar as explained
in the previous section.
NOTES
• Initializing a memory will erase any [Pens and Stamps] drawing canvas
and image files you may have saved. (:/9/8 The image
mix frames that come pre-installed in the built-in memory will be
restored after it is initialized.)
• [Animated Stamps] and [Date/Time] cannot be used at the same time.
• Image mix cannot be selected during recording or playback. Select the
image mix during playback pause or before starting the conversion of
movies to MP4 (:/9/8 only).
• During recording mode or when dual recording is activated, decoration
is not available when the video quality is set to 50P or 35 Mbps.

Video Snapshot

Record a series of short scenes. When you play back your video snap-
shot scenes, you can even set them to your favorite music (A 92) to
72
Advanced Shooting
SCN