Philips HD3037 User Manual

Always there to help you
1
Register your product and get support at
www.philips.com/welcome HD3037
Question?
Contact
Philips
EN User manual
www.philips.com/welcome www.philips.com/welcome
FR Mode d'emploi
User manual Safety leaflet
3
m
n
Specifications are subject to change without notice
© 2013 Koninklijke Philips N.V.
All rights reserved.
HD3037_UM_EN+FR_V2.0_130718
6 Wipe the outside of the inner pot dry, then put it in the
English
multicooker. Check if the inner pot is in proper contact with the
heating element.
7 Close the lid of the multicooker, and put the plug in the power
1 Your multicooker
socket.
Congratulations on your purchase, and welcome to Philips!
To fully benefit from the support that Philips offers, register your Note
product at www.Philips.com/welcome.
•
Make sure that the outside of the inner pot is dry and clean, and that
2 What's in the box (fig.1)
there is no foreign residue on the heating element or the magnetic switch.
•
Do not exceed the volume indicated nor exceed the maximum water
Multicooker main unit Steam basket level indicated in the inner pot, as this may cause the multicooker to
overflow.
Rice scoop Soup ladle
Measuring cup Power cord
User manual Safety leaflet
Warranty card Recipe booklet
Tip
Overview (fig.2)
•
The level marked inside the inner pot is just an indication. You
can always adjust the water level for different types of rice and
Lid Power socket
a f your own preference. Do not exceed the maximum quantities
indicated on the inside of the inner pot.
Inner pot Heating element
b g
•
Besides following the water level indications, you may also add
c Lid release button h Water level indications
rice and water at 1:1-1.2 ratio for rice cooking.
Control panel Cooker handle
d i
Main body Detachable steam vent cap
e j
Cooking rice or risotto (fig.5)
Controls overview (fig.3)
1 Follow the steps in "Preparations before cooking".
2 Press the menu button (Menu) until the rice cooking function (Riz)
k Cooking functions p Hour button
or the risotto cooking function
Display Minute button 3 Press the start button (Start) to start cooking.
l q
4 When the cooking is finished, you will hear a few beeps and the
Off/Warm button Cooking time button
m r
selected cooking function light will be off.
Menu button Temperature button
n s
5 The multicooker will be in keep-warm mode automatically.
» The keep-warm indicator lights up.
Preset button Start button
o t
3 Using the multicooker
Tip
•
You can press the cancel button (Off/Chaud) or unplug the
Before first use
multicooker to turn off tddhe keep-warm function or when
not in use.
1 Take out all the accessories from the inner pot. Remove the sheet
•
The default cooking time is 40 minutes, and is not adjustable.
between the inner pot and the heating element.
2 Clean the parts of the multicooker thoroughly before using the
multicooker for the first time (see chapter 'Cleaning').
Cooking ratatouille (fig.6)
Note
1 Put food and ingredients in the inner pot.
2 Follow steps 6 and 7 in "Preparations before cooking".
•
Make sure all parts are completely dry before you start using the
3 Press the menu button (Menu) until the ratatouille cooking
multicooker.
function (Ratatouille) is selected.
4 Press the start button (Start) to start cooking.
5 When the cooking is finished, you will hear a few beeps and the
(fig.4) selected cooking function light will be off.
Preparations before cooking
6 The multicooker will be in keep-warm mode automatically.
Before using the multicooker, you need to follow below preparations: » The keep-warm indicator lights up.
1 Measure the rice using the measuring cup provided.
2 Wash the rice thoroughly.
3 Put the pre-washed rice in the inner pot.
4 Add water to the level indicated on the scale inside the inner pot
that corresponds to the number of cups of rice used. Then smooth
the rice surface.
5 Press the lid release button to open the lid.
2
a
j
b
i
c
h
d
g
e
f
www.philips.com/welcome www.philips.com/welcome
Warranty Recipe
l k
t
s
o p q r
Tip
•
You can press the cancel button (Off/Chaud) or unplug the
multicooker to turn off the keep-warm function or when not
in use.
•
The default cooking time is 40 minutes, and is not adjustable.
Cooking plats en sause (fig.7)
1 Put food and ingredients in the inner pot.
1 Follow steps 6 and 7 in "Preparations before cooking".
2 Press the menu button (Menu) until the plats en sauce cooking
function (Plats en sauce) is selected.
3 Press the cooking time button (Temps de cuisson), and the hour
unit starts flashing on the display.
4 Press the hour button (Hr.) to set a desired hour unit.
5 After the hour unit is set, press the cooking time button (Temps de
cuisson) again, and the minute unit starts flashing on the display.
6 Press the minute button (Min.) to set a desired minute unit.
7 Press the start button (Start) to start cooking.
8 When the cooking is finished, you will hear a few beeps and the
selected cooking function light will be off.
9 The multicooker will be in keep-warm mode automatically.
» The keep-warm indicator lights up.
Tip
(Risotto) is selected.
•
You can press the cancel button (Off/Chaud) or unplug the
multicooker to turn off the keep-warm function or when not
in use.
•
The default cooking time is 2 hours. You can select the cooking
time from 1 to 4 hours.
Boiling (fig.8)
1 Put food and ingredients into the inner pot.
2 Follow steps 6 and 7 in "Preparations before cooking".
3 Press the menu button (Menu) unitl the boiling function (Bouillir)
is selected.
4 Press the cooking time button (Temps de cuisson), and the minute
unit starts flashing on the display.
5 Press the minute button (Min.) to set a desired minute unit.
6 Press the start button (Start) to start cooking.
7 When the cooking is finished, you will hear a few beeps and the
selected cooking function light will be off.
8 The multicooker will be in keep-warm mode automatically.
» The keep-warm indicator lights up.
Note
•
The cooking time begins once the water is boiling, and the time is
displayed as a countdown.
4 5
6
7
8
Making yogurt (fig.11)
Tip
•
You can press the cancel button (Off/Chaud) or unplug the 1 Whisk the ingredients for the yogurt well and put them in a glass
multicooker to turn off the keep-warm function or when not container.
in use. 2 Put the glass container in the inner pot. Make sure that the
•
The default cooking time is 30 minutes. You can select the container is sealed.
cooking time between 5 to 30 minutes.
3 Pour some water in the inner pot. Make sure that half of the
container is immersed in water.
4 Follow steps 6 and 7 in "Preparations before cooking".
5 Press the menu button (Menu) until the yogurt making function
Stewing (fig.9)
(Yaourt) is selected.
6 Press the cooking time button (Temps de cuisson), and the hour
1 Put the food and ingredients in the inner pot.
unit starts flashing on the display.
2 Follow steps 6 and 7 in "Preparations before cooking".
7 Press the hour button (Hr.) to set a desired hour unit.
3 Press the menu button (Menu) until the stewing function (Mijoter)
8 After the hour unit is set, press the cooking time button (Temps
is selected.
de cuisson) again, and the minute unit starts flashing on the
4 Press the cooking time button (Temps de cuisson), and the hour
display.
unit starts flashing on the display.
9 Press the minute button (Min.) to set a desired minute unit.
5 Press the hour button (Hr.) to set a desired hour unit.
10 Press the start button (Start) to start cooking.
6 After the hour unit is set, press the cooking time button (Temps de
11 When the cooking is finished, you will hear a few beeps and the
cuisson) again, and the minute unit starts flashing on the display.
selected cooking function light will be off.
7 Press the minute button (Min.) to set a desired minute unit.
12 The multicooker will be in standby mode automatically.
8 Press the start button (Start) to start cooking.
9 When the cooking is finished, you will hear a few beeps and the
selected cooking function light will be off.
Tip
10 The multicooker will be in keep-warm mode automatically.
» The keep-warm indicator lights up. • You can unplug the multicooker immediately after the cooking
is finished.
•
The default cooking time is 8 hours. You can select the cooking
time between 6 to 12 hours.
Tip
•
You can press the cancel button (Off/Chaud) or unplug the
multicooker to turn off the keep-warm function or when not
Reheating (fig.12)
in use.
•
The default cooking time is 1 hour. You can select the cooking
1 Loosen the cooled rice and evenly distribute it in the inner pot.
time between 20 minutes to 10 hours.
2 Pour some water onto the rice to prevent it from becoming too
dry. The quantity of the water depends on the amount of rice.
3 Follow steps 6 and 7 in "Preparations before cooking".
Frying (fig.10)
4 Press the menu button (Menu) until the reheating function
(Réchauffer) is selected.
1 Put food and ingredients into the inner pot.
5 Press the cooking time button (Temps de cuisson), and the
2 Follow step 6 in "Preparations before cooking". minute unit starts flashing on the display.
3 Put the plug in the power socket.
6 Press the minute button (Min.) to set a desired minute unit.
4 Press the menu button (Menu) until the frying function (Frire) is 7 Press the start button (Start) to start cooking.
selected.
8 When the cooking process is finished, you will hear a few beeps
5 Press the cooking time button (Temps de cuisson), and the minute and the selected cooking function light will be off.
unit starts flashing on the display.
9 The multicooker will be in keep-warm mode automatically.
6 Press the minute button (Min.) to set a desired minute unit. » The keep-warm indicator lights up.
7 Press the start button (Start) to start cooking.
8 During cooking, stir the food constantly using a spatula.
9 When the cooking is finished, you will hear a few beeps and the Tip
selected cooking function light will be off.
•
You can press the cancel button (Off/Chaud) or unplug the
10 The multicooker will be in keep-warm mode automatically.
» The keep-warm indicator lights up. multicooker to turn off the keep-warm function or when not
in use.
•
The default cooking time is 25 minutes. You can select the
cooking time between 8 to 25 minutes..
Note
•
This function must be operated with the lid opened.
•
This function may be not used for deep fry, and the amount of oil may not
exceed marking "2".
•
The default cooking time is 42 minutes. You can select the cooking time
between 5 to 59 minutes.
9 13
10
14
11
15
12
13 The multicooker will be in keep-warm mode automatically.
Baking (fig.13)
» The keep-warm indicator lights up.
1 Put the food and ingredients in the inner pot. 14 Open the lid and carefully take out the steamed food from the
plate or the steam basket.
2 Follow step 6 in "Preparations before cooking".
3 Put the plug in the power socket.
Note
Note
•
The cooking time begins once the water is boiling, and the time is
displayed as a countdown.
•
When baking cake, keep the lid closed during cooking. Baking cake at •
When removing the steamed food from the steam basket, use a kitchen
130°C and by 45 minutes usually delivers best cooking result.
glove or a cloth, as the plate and steam basket will be very hot.
•
•
When baking food other than cake, the lid must be opened during
When you cook rice and steam food at the same time, make sure you
cooking.
measure out an amount of rice that leaves enough room for the steam tray.
4 Press the menu button (Menu) until the baking function (Four)
is selected. Tip
5 Press the cooking time button (Temps de cuisson), and the hour
•
unit starts flashing on the display. You can press the cancel button (Off/Chaud) or unplug the
6 Press the hour button (Hr.) to set a desired hour unit. multicooker to turn off the keep-warm function or when not
in use.
7 After the hour unit is set, press the cooking time button (Temps de
•
cuisson) again, and the minute unit starts flashing on the display. The default steaming time is 30 minutes. You can select the
cooking time between 5 minutes to 2 hours.
8 Press the minute button (Min.) to set a desired minute unit.
9 Press the temperature button (Température), and the default
cooking temperature starts flashing on the display.
10 Press the temperature button (Température) to set a desired
Preset time for delayed cooking (fig.15)
baking temperature.
11 Press the start button (Start) to start cooking.
You can preset the delayed cooking time in different cooking modes.
12 When the baking is finished, you will hear a few beeps and the
The preset timer is available from 10 minutes to 24 hours.
selected function light will be off.
1 Follow steps 6 and 7 in "Preparations before cooking".
13 The multicooker will be in keep-warm mode automatically.
2 Press the menu button (Menu) until your desired cooking function
» The keep-warm indicator lights up.
is selected.
3 Press the preset time button (Départ différé).
» The preset timer starts flashing on the display.
Tip
4 Press the hour button (Hr.) and minute button (Min.) to set the
preset time.
•
When removing the inner pot from the multicooker, use a
5 Press the start button (Start) to confirm the preset time.
kitchen glove or a cloth, as the inner pot will be very hot.
6 The cooking will be finished when the preset time has elapsed.
• The default cooking time is 45 minutes. You can select the
You will hear a few beeps and the selected cooking function light
cooking time between 20 minutes to 2 hours.
will be off.
•
The default cooking temperature is 60°C. The available
7 The multicooker will be in keep-warm mode automatically.
temperature options are 40°C, 60°C, 80°C, 100°C, 120°C,
» The keep-warm indicator lights up.
150°C, and 180°C.
Note
Steaming (fig.14)
•
The preset timer is not available in fry (Frire) and bake (Four)
1 Measure a few cups of water with the measuring cup.
2 Pour the water into the inner pot.
3 Put the steam basket into the inner pot.
Tip
4 Put the food into the steam basket.
5 Close the lid of the multicooker, and put the plug in the power
•
After the preset time is set, you can press the cancel button
socket.
(Off/Chaud) to deactivate the preset function.
6 Press the menu button (Menu) until the steaming function •
You can press the cancel button (Off/Chaud) or unplug the
(Cuisson vapeur) is selected.
multicooker to turn off the keep-warm function or when not
7 Press the cooking time button (Temps de cuisson), and the hour
in use.
unit starts flashing on the display.
8 Press the hour button (Hr.) to set a desired hour unit.
9 After the hour unit is set, press the cooking time button (Temps de
cuisson) again, and the minute unit starts flashing on the display.
10 Press the minute button (Min.) to set a desired minute unit.
11 Press the start button (Start) to start cooking.
12 When the steaming is finished, you will hear a few beeps and the
selected cooking function light will be off.
modes.