Saeco Intuita HD8750 User Manual page 34

ENGLISH
32
18 Disassemble all the parts shown in the picture.
19 Wash all the parts with lukewarm water or in the dishwasher.
20
Make sure that any milk residues are removed from the slot of the cou-
pling (see arrow in the image on the left). If you don't do this you will
not be able to froth milk. Clean it thoroughly with an abrasive damp
cloth.
21 Reassemble all the cappuccinatore parts and place it back in the ma-
chine.
22
Insert the Cappuccinatore until it locks in place in the steam wand seat
(Fig.A).
Caution:
If the Cappuccinatore is fi tted up to its limit stop (beyond the hi-
ghlighted seat), it might not operate correctly since no milk is sucked;
in this case stop brewing, let the Cappuccinatore cool down and SLIGHTLY
move it downwards (Fig. B) to place it back in its proper seat (Fig.A).
Follow this procedure to restore the correct operation of the Cappuccina-
tore.