Ryobi P910 Operator's Manual

The Ryobi large rolling toolbox is a great way to keep your
hand tools organized, accessible, neatly stored, and ready
to transport. Its large storage capacity accommodates a
wide variety of tools and accessories.
Adjustable dividers inside the toolbox allow you to customize
the storage compartments to fit your specific requirements.
Dividers can be raised and fastened into place whenever
needed, then unfastened and lowered when a larger storage
area is desired.
A cover is provided in the Velcro
side of the toolbox. It can be stretched over the top to help
protect your tools from dust, debris, and moisture.
Before using the toolbox for the first time, some minor as-
sembly is required.
ASSEMBLING THE TOOLBOX:
See Figures 1 - 7.
n Raise the toolbox frame's end panels until they are stand-
ing straight up.
END PANEL
END PANEL
LARGE TOOLBOX
P910
pocket located on the
®
TOOLBOX
FRAME
Fig. 1
n Lower the fabric body over the toolbox frame. Make
sure the pull strap is positioned on the side opposite the
wheels.
PULL
STRAP
TOOLBOX FRAME
n Insert the toolbox handle through the vertical opening
located on the end panel of the toolbox frame.
FABRIC
BODY
Fig. 2
HANDLE
Fig. 3