Timer Setting Tool - Canon VB-C50i User Manual

Timer Setting Tool

The section below describes the "Picture Recording" function that takes still images at specified
times and records them in the VB-C50i/VB-C50iR. It also describes the "Audio Playing" function
that plays back audio.
Timer Setting Tool Display Screen
qwe
q "Load Settings" button
Loads the timer settings currently set in the VB-C50i/VB-C50iR.
w "Save Settings" button
Saves the timer settings edited using this Tool.
After setting the timer function, be sure to click the "Save Settings" button to save the
settings.
e "Stop Communication" button
Click this button during communication with the VB-C50i/VB-C50iR to cut the connection.
r Timer Setting box
Select the setting number you want to use.
t Capture still images
Check to capture images at the set repetitive intervals and record to the VB-C50i/VB-C50iR.
y Camera Preset
Select an angle when recording picture. Select from "Does not specify" or from preset names
already set.
u Camera Stabilization Time
Starts capturing images after waiting for the specified time for the camera to stabilize after
moving. The maximum time is 10 seconds.
i Repetition Interval
Sets the interval between repeated image recording. Repetition Interval can be set to a maximum
of 23 hours, 59 minutes and 59 seconds. If you set Repetition Interval to 0, a still image is only
recorded once at the start of the scheduled time.
o Disable movement to the home position and auto preset tour
Check to disable movement to home position and Preset Tour during picture recording. You
can only enter a tick if a preset is specified in "Camera Preset" and "Repetition Interval" is set
to more than 30 seconds.
Schedule Setting Tool
r
t
y
u
i
o
!0
!1
!2
4-39