BIOS Setup
▶
My OC Gene
Ths tem s used to select whether OC Gene parameters are customzed by user.
Settng to [MSI] OC Gene wll use default OC related parameters to overclock the
system. Selectng [Customze] allows you to configure the followng related "My OC
Gene opton" sub-menu manually for OC Gene.
▶
My OC Gene opton
Press <Enter> to enter the sub-menu.
▶
My OC Gene GT Overclockng
Ths tem allows you to enable/ dsable the overclockng of ntegrated graphcs for
My OC Gene functon.
▶
My OC Gene GT Rato
Ths tem allows you to specfic the GT rato for My OC Gene functon.
▶
Adjusted My OC Gene GT Frequency
It shows the GPU frequency when OC Gene s started. Read-only.
▶
DRAM Reference Clock
Ths tem allows you to specfic the DRAM Reference Clock for CPU. Please note the
overclockng behavor s not guaranteed.
▶
DRAM Frequency
Ths tem allows you to adjust the DRAM frequency. Please note the overclockng
behavor s not guaranteed.
▶
Adjusted DRAM Frequency
It shows the adjusted DRAM frequency. Read-only.
▶
DRAM Tmng Mode
Select whether DRAM tmng s controlled by the SPD (Seral Presence Detect) EE-
PROM on the DRAM module. Settng to [Auto] enables DRAM tmngs and the followng
"Advanced DRAM Configuraton" sub-menu to be determned by BIOS based on the
configuratons on the SPD. Selectng [Lnk] or [Unlnk] allows users to configure the
DRAM tmngs for each channel and the followng related "Advanced DRAM Configura-
ton" sub-menu manually.
▶
Advanced DRAM Configuraton
Press <Enter> to enter the sub-menu.
▶
Command Rate
Ths settng controls the DRAM command rate.
▶
tCL
Controls CAS latency whch determnes the tmng delay (n clock cycles) of startng
a read command after recevng data.
▶
tRCD
Determnes the tmng of the transton from RAS (row address strobe) to CAS (col-
umn address strobe). The less clock cycles, the faster the DRAM performance.
▶
tRP
Controls number of cycles for RAS (row address strobe) to be allowed to pre-charge.
If nsufficent tme s allowed for RAS to accumulate before DRAM refresh, the DRAM
2-12